Magnadyne M3-LCD Troubleshooting Guide download pdf (Page 46)

ENGLISH

󰥒Notes:

• When the EXTERNAL IN is selected as a main input, if the MAIN source is selected as a ROOM 2 input, no audio signal can

be heard in the different room (ROOM 2).

• Even when this receiver enters the standby mode, in such a case that " " lights up still and the POWER

ON/STANDBY button lights up blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the

ROOM 2 source can be played independently.

• When you do not use the ROOM 2 function, turn off the ROOM 2 function to save electricity.

• ROOM 2 ~ is displayed for several seconds.

• When the ROOM 2 setting mode disappears, press the

ROOM 2 button again.

• Each time these buttons are pressed, the mode changes

as follows :

ROOM 2 ~ : To turn on or off the ROOM 2

(ROOM 2 mode) function.

󰥸

INPUT ~ : To select the desired ROOM 2 source.

(ROOM 2 input)

󰥸

VOLUME ~ : To adjust the volume on the power

(ROOM 2 volume) amplifier assigned to ROOM 2.

󰥒Note :

• When the ROOM 2 mode is set to OFF, the ROOM 2

input and the ROOM 2 volume cannot be selected.

■When selecting the ROOM 2 mode.

ON : To turn on the ROOM 2 function.

󰥸 (" " lights up.)

OFF : To turn it off. (" " or " "

goes off depending on the AMP ASSIGN setting.)

■When selecting the ROOM 2 input.

• You can select the desired among MAIN source,

TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 4 as a

ROOM 2 source.

■When selecting the ROOM 2 volume.

• You can adjust the volume on the power amplifier

assigned to "BACK ←→ROOM 2" or "ROOM 2" when

the ROOM 2 speaker terminals are connected to the

speakers in a different room. (For details, refer to

"When selecting the AMP ASSIGN" on page 49.)

1. Press the ROOM 2 button to enter the ROOM 2 mode.

3. Set the selected mode as desired.

4. Start play on the component related to the ROOM 2

source.

2. Select the desired mode while displaying the ROOM 2

setting mode.

When using the buttons on the front panel

Continued

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 80 81

Comments to this Manuals

No comments

Magnadyne M3-LCD Troubleshooting Guide Page 46

Comments to this Manuals

Related products and manuals for AV receivers Magnadyne M3-LCD