Magnadyne M3-LCD Troubleshooting Guide download pdf (Page 13)

• The multi-room system kit(sold separately ) is essential for operation from a remote location .

For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or

www.xantech.com.

• IR IN jack allows you to control this receiver from another room with the remote control unit.

• To control this receiver from another room with the remote control unit, connect the IR IN jack to the output of

the connecting block.

• If this receiver is located inside a cabinet or other enclosure where the infrared beams from the remote control

unit cannot enter, then operation with the remote control unit will not be possible. In such a case, connect the

IR IN jack to the output of the connecting block.

• To control other compatible component from another room with the universal remote control unit, connect the

IR OUT jack to the IR emitter.

󰥒Note:

• Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or

inverted fluorescent.

ENGLISH

10. CONNECTING MULTI-ROOM SYSTEM KIT

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 80 81

No comments

Magnadyne M3-LCD Troubleshooting Guide Page 13